Sprayed tan Colorcoat over some of the grey trim pieces, and stitched together a matching E-brake boot...just about ready to throw the new G1 dash back in for a test fit.
also have a dual din entertainment center I thought you find interesting...very reasonably priced for what it does:
Car-Joyâ„¢ 8 inch double-din Android 4.0 / 3G WIFI GPS Car dvd
♦.High definition digital panel（Pixel 800*480) ♦.8 inch Touch screen monitor ♦.steering wheel control function ♦.Built-in Bluetooth for mobile hands-free. ♦.Built in IPOD function ♦.PIP(picture in picture.) ♦.3D Rotating UI (slide from left to right and from up to down ) ♦.Built in ATV ( ISDB,ATSC,DVB-T are optional ) ♦.2-Zone function ,the 2 program can be setting differently ♦.Built in GPS function ♦.Radio receiving: FM/AM can be stored 32 stations. RDS is available . ♦.USB/SD card port: support MP4,DIVX,JPEG,MP3 and WMA playback ♦.Car backing display: Car reverse camera input (switch automatically) ♦.Language of OSD menu with DVD:Chinese,English,French,German,Italian,Spainish,Portuguese,(Thailand,Japanese) ♦.Operation menu of language: Simplified Chinese,Traditional Chinese,English,Russian,Italian,Turkish,Japanese,German,French,Portuguese,Arabic,Portuguese ♦.AV output/input :2 video out, 4audio output, 2video input ,2 audio input ♦.Subwoofer output ♦.Compatible with DVD,DVD-R,DVD-RW,HDVD,DVCD,MP3,MP4,CD-R,CD-RW,VCD,DIVX,WMA etc. ♦.Maximal power:4X50W maximum power output CPU: MSTAR 776multi-media processor, main frequency exceeds 533MHz Memory/FLASH: 128MB Operation system: Android 4.0 (ICS) SD Card: Support double hi-speed SDHC（32G) card USB: support USB HOST, USB pen readable
[This message has been edited by TXOPIE (edited 02-03-2013).]
Test fitting the nearly completed G1 dash into the '88 Formula. Tooling for the airducts, shifter boot cover, and glovebox filler panel are all that is left to complete this project. Overall, a pretty good fit. Will need a power mirror switch and racing pedals, and to re-color the armrest to black.
Pricing for the do-it-yourself parts kit will be set tentatively at us$1599.00 + s&h. Trimming, prep & upholstery are optional.
That is just what the Fiero needed! Modern looking and 80's box style gone!
You sir, are the bomb when it comes to Fiero interiors.
Crap, I think I have a "man-crush" now!
What are you looking at as far as a time line to pop a complete kit for the do-it-yourselfer compared to doing a complete kit covered, guages, etc., wired and ready to just bolt in?
What is the blank plate between the HVAC control and the flat screen?
Are you making door panels to match or will your 355 panels work with this?
Lastly, does it have a cup-holder?
[This message has been edited by IwannaIRM (edited 02-05-2013).]
What are you looking at as far as a time line to pop a complete kit for the do-it-yourselfer compared to doing a complete kit covered, guages, etc., wired and ready to just bolt in?
I have an fi355 interior to finish, but can start new G1s now.
What is the blank plate between the HVAC control and the flat screen?
Empty space for accessory switches, etc.
Are you making door panels to match or will your 355 panels work with this?
I may do simple door panels based on stock door handles/cheap alternatives depending on level of interest. Don't know if Fi355 handles will work; haven't thought about it. It's a $600 feature that I'd rather not design around.
Lastly, does it have a cup-holder?
Maybe cut a hole in the armrest and insert a cup holder?
Both manual and auto shifters will use the same console layout. However, for auto shifters a manual boot ring & new boot will be needed, and a few washer spacers may be needed under the shifter to raise it a tad to prevent the stick from hitting the boot cover.
Manual boot ring with reliefs cut out for auto stick clearance.
New boot & ring mounted to console bezel.
Full auto shifter travel with boot. ( Boot cover is not fastened in photo )
That Is by far the best interior I have ever seen in a fiero!! dam man good job! hopefully I'll have another one someday soon and thats going to be my second mod to the motor.
[This message has been edited by IVANNATINKLE (edited 02-10-2013).]
The upcoming spring car show season is just around the corner. If you need a dash by Spring you should let me know asap; it'll take some time to assemble parts and there's only two hands working in this shop.
The upcoming spring car show season is just around the corner. If you need a dash by Spring you should let me know asap; it'll take some time to assemble parts and there's only two hands working in this shop.
Here is another mystery someone can explain...I found an actually fiero black power mirror switch...what specific fiero had a black one?
And no this is not the same unit that went in the camaro or IROC...I have one of each and those two have the same molded on plastic mount points, which are different then the fiero's units...they can easily be modified to work, but not the same GM part.
seller just contact me and stated that the GM part # is as follows: GM #20426105
[This message has been edited by TXOPIE (edited 02-11-2013).]
...the area that is raised out...I outlined it in black above. 
