looking for 88 calipers front and back dont need to work just useing the outer caliper hat, haveing it chromed then installed on my car very easy mod looks sexy i am keeping my ne project car a scecret no pics untill compleat LONDON look out there will be a new sheriff in town when its done !
looking for 88 calipers front and back dont need to work just useing the outer caliper hat, haveing it chromed then installed on my car very easy mod looks sexy i am keeping my ne project car a scecret no pics untill compleat LONDON look out there will be a new sheriff in town when its done !
I have your 88 front calipers and can deliver since I work in Mississauga...
Bump, incase we all forgot about this thread. I need a spoiler stand, yep just one if anyone has one let me know. I have some 84 grey interior pieces to barter with.
Looking to buy front Impact bar for a 86 GT must have the front turn signal brackets on it. Little or no rust .... I have Paypal .. thanks for your help
Pioneer front speakers. Stock rears(I assume) - Work great Complete set of shocks, AC Delco - Nothing wrong with them when I pulled them off the car last spring to go to kyb Washers for front caster adjustment Front upper control arms - Little surface rust, easily cleaned up AC Delco CR43TS Spark plugs Coil pack, good for 7730 DIS conversion - Used, connector got broken being shipped to me 86 V6 4 speed ECM 86 V6 ECM holder
GT License plate holders. 1 Brand new in the plastic at the back 1 Used, with a small crack on the side trim
Have many parts for 2.8 let me knoe what your looking for doing motor swap so just about anything you need all in perfect condition off my 88GT 48,000miles many of the parts are new ! 17 LBS injectors( 500miles on them ) brand new EGR tube FS Sprint headers stock air box and air filter canister no rust full 2.8 exhaust no leaks with or with out stainless 3inch oval tips holly big bore TB with all sencors MSD 6 AL box plug and play wireing, block , are spoken for but way too much to list let me know if you need something would like to keep shipping within Canada if posible
[This message has been edited by RULOOKIN (edited 04-30-2011).]
Slightly O/T, but if anyone here wants to split the cost of gas and a pickup truck rental, I will be doing a run to Michigan shortly. A member here was kind enough to offer up an 88 suspension, so I will be picking it up. If you want to tag along and split the costs, I know of another clean 88 GT 5 spd with the panels removed for around $1000. We can figure out in advance what we want for the car and bring the car and the suspension pieces back from Michigan.
email me if you are interested peigler (a t) gmail.com
Pete
[This message has been edited by cam-a-lot (edited 04-30-2011).]
looking for very good 2.8 v6 exhaust manifolds for my '85 (firewall one really needed, mine has a very small crack) or a pair, no cracks or issues pls. pm me if u have..
I have an 88 GT that would be a great parts car or resto project.
Black, auto, 67,000 miles, (US car) Very good grey interior All panels original and accident free Engine runs fine, but needs oil pan Cradle is rotten, the rest of the suspension needs a good cleaning but drives solid Quarter windows, tail light lenses are mint
Basically I don't need this car, as I am fixing up 2 other 88 GTs and don't have the time/skills to fix this one up. It has new brakes, but the headliner is sagging. I do have a new one for it.
Anyone looking for a good project? This car is too good to part out, but the cradle is definitely shot and needs to be replaced.
looking for 87-88 headlight conversion (wiring, motors, housing... everything) willing to drive about 200kms from Kitchener Ontario to pick up. PM me with a price.
LED Turn signal strips, Brand New, Just bought(5/5/11) from TLG Automotive, Amber for the front and Red for the rear
Stock GT Exhaust Tips made by Rodney Dickman, 100% 304 Stainless Steel, Brand New He has limited to stock on hand and will not make more. When these are gone that is the end of these. I honestly wanted to hold on to these because they aren't going be made anymore but I need to sell them.
Factory Sub enclosure with Tang band sub and great small amp.
Have many parts for 2.8 let me knoe what your looking for doing motor swap so just about anything you need all in perfect condition off my 88GT 48,000miles many of the parts are new ! 17 LBS injectors( 500miles on them ) brand new EGR tube FS Sprint headers stock air box and air filter canister no rust full 2.8 exhaust no leaks with or with out stainless 3inch oval tips holly big bore TB with all sencors MSD 6 AL box plug and play wireing, block , are spoken for but way too much to list let me know if you need something would like to keep shipping within Canada if posible
PM sent...
Others >> looking for the cold start switch (2.8) and ideally a harmonic balancer (88 2.8)
thanks
[This message has been edited by Mickey_Moose (edited 05-19-2011).]
Others >> looking for the cold start switch (2.8) and ideally a harmonic balancer (88 2.8)
thanks
PM replied to, still a few things left, MSD, Header and y pipe ,cradle,trani, all sold very nice exhaust compleat with cat and 3 inch oval tips stainless only shipping with in Canada, clean 88 coolant cross over pipe, stock intake and can no rust, 88 ecm tray, underdrive pully,17 lbs injectors, Big bore TB (holly), cran gold roller rockers, 88 plenum, valve covers, many other things, let me know whta you need
[This message has been edited by RULOOKIN (edited 05-19-2011).]
Cam-a-lot is coming my way to pick up some parts and he suggested I list what I have on http://www.gtfieros.com/phpBB3/index.php which I have done (post is - Variety of parts BUT MUST HURRY). Take a look and let me know of interest (by way of the instructions in the post). Cam is coming this weekend and for a little help with the gas he can bring them a lot closer to you.