quote Originally posted by michfiero: Hey All, Cam-a-lot is coming my way to pick up some parts and he suggested I list what I have on http://www.gtfieros.com/phpBB3/index.php which I have done (post is - Variety of parts BUT MUST HURRY). Take a look and let me know of interest (by way of the instructions in the post). Cam is coming this weekend and for a little help with the gas he can bring them a lot closer to you. Thanks

I emailed him please remember to tape my things together and give them to him THANKS FOR EVERYTHING !!! will post feedback when I receive them THX
Danyel

edited My page ... 2nd in arow

------------------

The Black Widow Site

[This message has been edited by Danyel (edited 05-20-2011).]

Anyone east of Toronto have a coolant overflow bottle/tank? Mine has a couple leaks along the seam (needed to be more gentle taking the hose off, grr) and patching has been unsuccessful.

Thanks,

Brad

I think I have an extra one ... I'll look in the garage tomorrow if no one has one avail close to you .....

I was going through all my stuff yesterday...I have one if Danyel doesn't...from an 88

quote Originally posted by BtotheB: Anyone east of Toronto have a coolant overflow bottle/tank? Mine has a couple leaks along the seam (needed to be more gentle taking the hose off, grr) and patching has been unsuccessful. Thanks, Brad

I have a couple if still needed. I am in Bancroft, and get to Belleville fairly often. The ones I have are for an '84-- don't know if they're the same?

quote Originally posted by DANGERUS: I have a couple if still needed. I am in Bancroft, and get to Belleville fairly often. The ones I have are for an '84-- don't know if they're the same?

As far as I know they're the same. That would be great, I'll PM you my contact info.

Thanks for the other offers, I'm worried about Canada Post going on strike in a couple days.. not sure shipping would work very well right now.

Brad

Sorry for the delay ... mine is toast ....

I'm currently trying to hunt down a hardtop roof panel. Colour doesn't matter. Anyone got anything for me?

realy need the clutch slave cly bracket off of a 4sp V6 car

Anybody got a scrap fiero with a crossmember support (the one that goes under the gas tank?)

the P.O. removed it when he scrapped the old (rotted) gas tank, and never included it with the parts he sold with the car.

Bolts would be nice, but I'm sure I can find those somewhere. just need to figure out the dimentions and hardness ratings or whatever.

Thanks!

I am thinkin of changing one of my 88 cars to right hand drive in the us. Need dash and all applicable parts

------------------
Make It SO!!!

Mystik....also sent pm....I have this part....bolts too. I am just outside Detroit

[This message has been edited by michfiero (edited 06-07-2011).]

Thanks for the PM. I don't visit often enough to keep track of everything :P

Detroit may necessitate delivery by post, see my reply, and send one back when you get the chance. TIA.

quote Originally posted by michfiero: Mystik....also sent pm....I have this part....bolts too. I am just outside Detroit

Looking for a 88 front right upper control arm, actually I just require the pivot that goes between the bushings that mounts the arm to the cross member.

PM or email if you have one.

Thanks

Edit to add picture, item 2 is what I am after:

[This message has been edited by Mickey_Moose (edited 07-31-2011).]

Looking for a pair of good power mirrors,

a passenger window,

and a knee bolster (the panel under the steering column) charcoal in colour from an 88

I'm located in Kitchener, ONT

LMK you location and prices , including pics of said parts.

Thanks

Looking for lower radiator support bracket brace "84-87

Any one have a 86-88 V6 5spd Shift Lever Cable Bracket? I'm located in Ottawa, Ontario.

------------------


JSzpotek's 3800NA Series III L26 White 87 Fiero GT

Hello from Winnipeg,
Here's my "garage sale" WTB wish list:
1) upper dog bone strut access cover (plastic or steel plate).
2) front aero nose license plate bracket/holder with anchor clips and screws.
3) grey front dash aftermarket glove box (PisaFiero/Fiero Store type).
4) grey centre glove box door (not warped/unblemished condition).
5) drivers side rear quarter panel red marker light/moulding with fasteners.
6) passenger side front quarter panel arrow point/tip moulding (in front of amber side marker light) with fastener.
Please email me details/price of any of the above items you may have.
Thanks for looking!

------------------
New owner of 88 Fiero GT and second time owner of 1985 Fiero GT. Bought my first fully loaded Fiero GT new in 1985.

The Widow is now in for the winter here are things for sale

1. Both driver and passenger seats ... in tan color .. these are in EXCELLENT shape WITHOUT rails ... $ 265 / pair



2. Rear wing 8 inches high with LED 3rd brake light in it $275


3. ROH 15" wheels I'll include the tires .. threads have 15% wear $375
205 in front 215 rear
See my siggy
------------------

My build Thread
http://www.tylerstoy.com
My LED marker kit

[This message has been edited by Danyel (edited 11-11-2011).]

I'm scrapping an 86 se with a v6 and aero trim. Rear bumper is gone. I pulled alot off, selling pretty much anything from the motor. Let me know what you need, I myself am looking for a sunbird turbo cluster/gt speedo.

Hi Guys,

I am looking for a rear spoiler for my 85GT. My car is the original silver, but am not overly concerned over the color as I will have it repainted anyway. I am really just looking for a wing that is in good shape. Not interested in anything fancy, just the original style. The one I have has a crack that I have tried to fix twice and it still cracks.

So if you have one, let me know what you want for it and how much to ship it to Regina, Sask. i might suggest the Bus, but if you don't want to check that let me know and I can go here and see what I can figure out.

thanks
Brent

quote Originally posted by hetterbr: I am looking for a rear spoiler for my 85GT. Brent

hetterbr
I got on in the garage I'll take a look and post pics I already sent one to Alberta so Sakatchewan shouldn't be any harder
I'll post pics tomorrow
Danyel

------------------

My build Thread
http://www.tylerstoy.com
My LED marker kit

Hi Danyel,
thanks, I will look for pictures tomorrow.
Brent

quote Originally posted by hetterbr: Hi Danyel, thanks, I will look for pictures tomorrow. Brent

There you go PM me if you want it ... needs a bit of TLC ...

Danyel

PM sent to Danyel.

Brent

Brent .... wing will ship out in the morning... THX
Danyel

Wanting to buy 88 headlight module NON WORKING I want to tear into it fo schematic purposes

thanks ....
Danyel

Looking for a decklid for my 88GT, would prefer one without spoiler/holes. Would take one if it has a spoiler with it. Would prefer if it was bright red but am open to whatever.

Also looking for a hood in excellent condition, would prefer bright red, but again I am open to whatever.

Would be interested in whole GT body for the right price.

I'm in Nova Scotia and am willing to travel a good distance for these parts if in excellent condition.

[This message has been edited by Fiero Owner (edited 12-20-2011).]

I've got a really good rear decklid (has spoiler holes)a not to bad front hood (no cracks)...both red from an 86 gt. If you can find a way to get them from the St John's area in newfieland you can have them.....I'd send you some pics but the snow has started flying here on the rock. If you are in no great hurry I'll take some as soon as I can.

Clearing out the garage and have run across a few items that I no longer have a use for:

All prices do not include shipping, will be expensive on the large parts but your call.


1 set used 2.8 injectors, rebuilt and balance a few years ago and only have 5000km (max) on them (car mostly sat). Came out of an 88. $40

1 set rebuilt/balance 2.8 injectors - never used since the rebuild (about the same time as the above set). $100

GT/SE/Indy spoiler - your choice as I have 2 (keeping 1). $80

right rear 85GT/SE wheel well liner - fits: 85 GT, 84 Indy, 85/86 SE (doesn't fit the fastback models too well). $10

1 set Izusu shifter cables - these are like new. $60

1 5 speed shifter. $20

1 used OEM clutch pedal. $10

1 front fascia that fits: 85 GT, 84 Indy, 85/86 SE. No cracks or rips - $200

Rodney Dickman made parts and fit all years and transmissions:
1) slave clutch line repair kit (brand new, never used) - $20
2) adjustable banjo, used (think I really only used this the 1 year) - $10

Helms 1986 Fiero service manual (this is the original GM shop manual) - like new - $50


Everything located in Edmonton AB Canada.

All parts will be shipped with insurance and tracking, no if's and's or but's.

Pictures on request.

Please email or PM if there is something you would like.

US buyers - expect shipping to be around $40+, some of the smaller stuff *might* be less, just don't expect it to be $10 as they seem to want to charge big time for crossing the border.

I am looking for all parts required to do a GT Fastback conversion on my 1984 notchback (deck lid, rear clip, engine vents, rear bumper cover and eggcrate, quarter windows, spoiler, wheel well liners, brackets, taillights, supports and fasteners, taillight harness, and anything else that may be required). I am in Nova Scotia, so the further east the better. I would consider an entire GT parts car if the price is right.

Thanks.

Wade

------------------
1984 Fiero, 355 SBC, 4 speed

hey wade off topic but is your 84 yellow by any chance with the frame painted yellow too?

Wow some one so close to me with a yellow fiero with a 355 in it. What is the chance? I might have some parts. You should visit me some time =p

[This message has been edited by Bixby (edited 03-28-2012).]

My car is all black. Bixby send me your contact info. I will come to Truro next week.

I am also looking for an emergency brake cable connector and an emergency brake cable adjuster.

------------------
1984 Fiero, 355 SBC, 4 speed

[This message has been edited by Driver_WT (edited 03-28-2012).]

Anyone has an Isuzu 5 speed transmission there looking to sell? Please PM me.

quote Originally posted by fieroall: Anyone has an Isuzu 5 speed transmission there looking to sell? Please PM me.

theirs been a few on kijiji i only have one spare but i kinda need it

Hi All,

Greetings from an American cousin in Southeast Michigan (great grandfather was from Vienna, Ontario). A person who goes by the handle cam-a-lot on the Pennock Forum is coming by this weekend to pick up some parts. He suggested I post what I have available in case there is any interest. He will have a trailer and could bring your parts back to Canada. He will most likely be looking for a little help with the gas (you would have to work that out with him).

So, here is what I have. We are all Fiero owners, meaning we are cheap so I will trust you to make fair and reasonable offers and the parts are yours for Cam to bring back (again work out the gas thing with him).

If you are interested in any of these....contact me through rutan1701@gmail.com

The following are from a parted out 88 non Michigan car (Arizona as I recall)...

White hood
white doors
White deck lid
White gt rockers
white wing with stand but one stand needs some repair
Radiator bottle
Radiator (Manual)
Windshield Washer bottle
White Fenders
Radiator (automatic) 1 year old

Other parts from other cars...

88 GT gray trim pieces (A/B pillars)
pair of good seats (buy the good seats and I'll throw in the "ok" seats if you want)
pair of ok seats
black hood "fixer up'er"
Fastback drip rails - very good condition
notchback drip rails - fair condition (slight bent by the post office...thanks guys!)
5 speed shifter (will need c clip)
Heat Shields
88 formula nose (very good condition but needs a little attention)
Black wing (stands included but need work)
5 spd Getrag


Sorry for the short notice but he is coming into town today.

Thanks

Tom

bixby i was just in truro the other day, i actually purchased a fiero out of there. i might know you, what do you have for parts?

Looking for some pieces in Ontario for my 88.

Either

a) Full set of Gray interior parts (dash, center console, pillars.. etc), carpet.

or

b) Tan inner door skins. Tan carpet.

Also in need of a headliner backer for sunroof, sunroof wind deflector, and spare tire/wrench/jack...