Hey spookything... You wouldnt happen to have any racing seats would you? If you're looking for two PERFECT grey SE/GT style seats I have them in my car. They are mint (no burns, rips, stains, cuts, holes, not even faded... they've been covered by seat covers for almost 9 years) but I would only trade or sell if I could get enough to compensate to buy some racing seats (I'm not talking ridiculous amounts for Sparco/Momo etc..) Let me know and if we could work something out, they're yours.
I am only listing parts that I think are worthy of re-use. I do have other parts that are in good shape but require repair in some fashion. I am not doing this to start a business, I just have a ton of good parts that I want to get rid of. They take up space!! Anyway here is the list. Hope it helps out somewhere.
#1 - 84 Fiero Standard Notchback (white) motor conver to 85 - 2.8 6cyl. Trunk Lid no luggage rack. Engine Covers (non vented ) need painting. Engine - parts only, was not running when purchased. Tranny as is. Driver seat - has speakers in headrest, they work, needs recovering. Door skins very good , need paint. Rockers very good , need paint. Rear 1/4s - very good, need paint Front 1/4s - very good, need paint. Front hood good, need paint. Headlight covers - good, need paint. Mirrors manual - very good, need paint. Wheel well liners - very good, Sunroof - very good. Front + Rear trunk rubber seals - very good, almost new. Windshield - - very good. Taillight Drivers side only - very good, needs buffing. Shifter cables- I have them both but will have to look further into their condtion. They are still on the vehicle and look worthy and feel smooth.
#2 86 Fiero SE (silver) Trunk Lid has luggage rack in great shape. Passenger door skin - very good Pass. rear 1/4 very good. Front 1/4s very good. Rocker covers very good but need paint no cracks. Sunroof - very good. All harnesses except engine. Wheel well liners - good,
If there is something you need that is not listed let me know.
I am only listing parts that I think are worthy of re-use. I do have other parts that are in good shape but require repair in some fashion. I am not doing this to start a business, I just have a ton of good parts that I want to get rid of. They take up space!! Anyway here is the list. Hope it helps out somewhere.
#1 - 84 Fiero Standard Notchback (white) motor conver to 85 - 2.8 6cyl. Trunk Lid no luggage rack. Engine Covers (non vented ) need painting. Engine - parts only, was not running when purchased. Tranny as is. Driver seat - has speakers in headrest, they work, needs recovering. Door skins very good , need paint. Rockers very good , need paint. Rear 1/4s - very good, need paint Front 1/4s - very good, need paint. Front hood good, need paint. Headlight covers - good, need paint. Mirrors manual - very good, need paint. Wheel well liners - very good, Sunroof - very good. Front + Rear trunk rubber seals - very good, almost new. Windshield - - very good. Taillight Drivers side only - very good, needs buffing. Shifter cables- I have them both but will have to look further into their condtion. They are still on the vehicle and look worthy and feel smooth.
#2 86 Fiero SE (silver) Trunk Lid has luggage rack in great shape. Passenger door skin - very good Pass. rear 1/4 very good. Front 1/4s very good. Rocker covers very good but need paint no cracks. Sunroof - very good. All harnesses except engine. Wheel well liners - good,
If there is something you need that is not listed let me know.
Regards ChezFiero
can you check the quality of the rear inner tie rods?
I am only listing parts that I think are worthy of re-use. I do have other parts that are in good shape but require repair in some fashion. I am not doing this to start a business, I just have a ton of good parts that I want to get rid of. They take up space!! Anyway here is the list. Hope it helps out somewhere.
#1 - 84 Fiero Standard Notchback (white) motor conver to 85 - 2.8 6cyl. Trunk Lid no luggage rack. Engine Covers (non vented ) need painting. Engine - parts only, was not running when purchased. Tranny as is. Driver seat - has speakers in headrest, they work, needs recovering. Door skins very good , need paint. Rockers very good , need paint. Rear 1/4s - very good, need paint Front 1/4s - very good, need paint. Front hood good, need paint. Headlight covers - good, need paint. Mirrors manual - very good, need paint. Wheel well liners - very good, Sunroof - very good. Front + Rear trunk rubber seals - very good, almost new. Windshield - - very good. Taillight Drivers side only - very good, needs buffing. Shifter cables- I have them both but will have to look further into their condtion. They are still on the vehicle and look worthy and feel smooth.
#2 86 Fiero SE (silver) Trunk Lid has luggage rack in great shape. Passenger door skin - very good Pass. rear 1/4 very good. Front 1/4s very good. Rocker covers very good but need paint no cracks. Sunroof - very good. All harnesses except engine. Wheel well liners - good,
If there is something you need that is not listed let me know.
Looking for an 88 fiero. Will also consider earlier years if it is a fastback.
-John
There was a black 88 for sale on the edmonton fiero club's forum. it was a while back but the thread didn't have any action. so it may still be for sale.
Not canadian, but i date one:P anyways I have a 84 Fiero SE sitting in Cavalier, ND (about 20 miles from Pembina, ND) thats i'm trying to get rid of.
It comes with a bunch of misc parts, a complete 2.5L (well missing a carb and intake) the car does run, just needs alot of TLC atm. Drivers seat is shot, paint is still good, headlights need rebuilt, inside switches need soldered back in (they were toggles switches but i have 95% of the replacement parts) I have a new/used steering column to replace the custed one, no radio.
I got the car around june 2005 and just haven't had time to travel to cavalier alot to do anything to it. If i remember right it has between 105,000 to 111,000 Miles. It does need tires tho. The ones its sitting on are my spare tires that actual hold air.
Anyone have a good getrag 5spd in canada ..that i could maybe purchase ..i'm interested in getting one for a swap ..thanks for any replys ..email me cause my PM box is getting full ..thanks
I saw the other "Exchange" thread and thought it would be a great idea to start a Canadian Based one.
Wanted: - Fast Back Rear Bumper Cover
Fiero Parts to Trade/Sell:
-Tan Seat Belts (need Cleaning) - 2x Grey Interior Door Panels - 2.8 Upper Plenium (needs paint, sticker) - 86 Left & Right Headlight Motors (gear has been reversed 180, works well) - 86 Headlight Buckets - Shift Surround 4sp - (worn but no cracks, no ashtray doors) - Behind Dash Air vent thingy
Random Stuff Forsale: - ASTRO/SAFARI Body Kit, Front, Rear, and GFX (Needs repairs) - Sony Hi-8 CamCorder.
Dave. Hello from the other Burlington.....Burlington, Prince Edward Island. Do you still have the tan seat belts?? I need a set. I have lots of grey seatbelts to trade or many other things. contact me. E-mail is best dale paynter@yahoo.ca
I am amazed that I haven't noticed this post beore, I have tons of parts but never try to sell them due to border crossing crap. I have lots of grey interior pieces and two near mint gray dashes with no holes or cracks. Lots of body panels and doors plus a lot of Fiero V6 parts. One complete engine and a few upper plenums as well as a set of low mileage 87 GT heads. Many sets of Fiero V6 engine mounts and alt brackets. I have two sheds large enough to hold Fieros that are pretty much full of parts, so many that I couldn't fit my second Fiero into one for winter storage. Dan
Dan's got alot of stuff (Fiero Flyer). Especially interior and trim pieces.
I've got a Centerforce Dual Friction clutch with only 1600 km on it for sale. It's in great shape. Pressure plate, clutch disc, and the throw out bearing. This kit is for a 2.8L V6 with any 5 speed. It's a 9 1/4" disc. I'm located in Whitby, Ontario. The clutch was orginally in my L67 swap, but I decided to switch to a semi-metallic disc.
I am amazed that I haven't noticed this post beore, I have tons of parts but never try to sell them due to border crossing crap. I have lots of grey interior pieces and two near mint gray dashes with no holes or cracks. Lots of body panels and doors plus a lot of Fiero V6 parts. One complete engine and a few upper plenums as well as a set of low mileage 87 GT heads. Many sets of Fiero V6 engine mounts and alt brackets. I have two sheds large enough to hold Fieros that are pretty much full of parts, so many that I couldn't fit my second Fiero into one for winter storage. Dan
Engraved plenum by chance? Drivers side aero rocker? Aero bumpers? Notchback GT sail panels (not cracked)? 2.8L oil pan?
Engraved plenum by chance? Drivers side aero rocker? Aero bumpers? Notchback GT sail panels (not cracked)? 2.8L oil pan? [/QUOTE]
Have one plenum but it is already spoken for, have the driver's side rocker and the oil pan. Not willing to part with the Aero bumpers but they would cost more than they are worth to ship that far. Dan
err the pic of the decklid with the dodge shadow wrap around wing..its not for sale!!!!!! its attached to my car...lol...geeze dans selling my car in pieces...hahahah teasin..i could have some fun snooping around all the goodies...tim..
No not to worry none of the parts off your car are for sale. The deck lid is out in the shed so it won't get damaged or be in the way while its off. It shows that I really need to organize my sheds so I can find stuff when I need it. Dan
I never got an answer to my question on tan seat belts--- Anybody? Would like a complete set in very good condition.
I have parts to trade. To long of a list to enter here. I have 2 scrapped Fiero coupes in PEI. Send e-mail is best with want list. dalepaynter@yahoo.ca
Dan would you have a wing for an 86gt fastback or a decklid with a wing in red. I'm in the process of moving and my garage looks like yours only it's dsm and audi stuff . I also need to get the front glass off you in the very near future after i fix a tranny leak. Free plug for Dan on Great pricing on parts and swaps.
1 Centerforce DF clutch and pressure plate, only used for under 1000 km. 9 1/4" disc, great for 2.8L V6 - ($175 cdn).
1 AC delco fuel pump for a 2.8L V6. Less than one two months old. Swapped out due to engine change (3800SC). This things retail for almost $200. I'll let it go for $75 cdn.
------------------ 1986 Pontiac Fiero SE | 3.4L Conversion Click here to view ----------------------------------------------------------- My Portfolio site | JustinChristie.ca
There are some parts I'm going to keep (exterior panels, etc). But if you are looking for something, pm or reply on this thread. Upper plenum, stock air-intake, snorkle, dash, etc. etc.
You can be Canadian or US, doesn't matter to me; except the larger parts may cost a fortune to ship to the US.
thanks,
Justin.
------------------ 1986 Pontiac Fiero SE | 3.4L Conversion Click here to view ----------------------------------------------------------- My Portfolio site | JustinChristie.ca