do they get brighter? thats in full sunlight, and they seem plenty bright to me... (remember these are the green ones)
thanks =todd=
OH Sorry, I thought they were not actually on as they looked yellow and out of focus. It looked like the #'s were just drawn on the panel or something.
That is as bright as they get without damaging the displays over time.
sorry about the pic i'll try to get a better one today.. no the panel is black when not running... outa focus? thats what happens when you try to shove a 7meg pic down to whats allowed on pennocks and you have a crappy photographer
Originally posted by TBSB9595: Norm, I hadn't thought about doing that, but I could have one made for you at an additional cost since it is a 1 time thing (+$40). Let me know when your ready. Thanks, tom
Acknowledged, thread "favoritized" and will check back when the time is right.
You still making these? I would be interested in at least the gauge overlay. Probably the AC/radio surround too.
Thanks for asking. Yes I am still making the trim panels and the digital gauge kit specifically for the Fiero. Do you need the trim panel for the Aux gauges above the stereo or just for the main dash? Thanks, Tom
I would only need the main dash piece but I may be playing around with making a new center console soon so I am not sure if I need that piece. I would need the gauge overlay for sure though.
I would only need the main dash piece but I may be playing around with making a new center console soon so I am not sure if I need that piece. I would need the gauge overlay for sure though.
Ok, for the main dash piece it would be $41 including shipping in the US. You can send me payment via my Paypal account which is under my email address of tbsb9595@worldnet.att.net Thanks, Tom
I would only need the main dash piece but I may be playing around with making a new center console soon so I am not sure if I need that piece. I would need the gauge overlay for sure though.
I like the idea, but I don't want the torx bolts to stick out.
Sorry but they don't have recessed holes. I know the screw will stick out, but black screws on a dark tinted panel aren't that noticable. Most folks like the look of it. Just my 2 cents.
Sorry but they don't have recessed holes. I know the screw will stick out, but black screws on a dark tinted panel aren't that noticable. Most folks like the look of it. Just my 2 cents.
Thanks for your interest, tom
You could change out the hardware and go with a screw with a lower profile head too!
Any chance of these being produced in other colors? Red?
Yes I could have them made in red or any color that I can get the material in. I would have to charge you around $20-30 extra to build a kit in red as I usually order 10 at a time. Let me know if you want to do this.
I don't have the funds right now but if you ever do come out with one for the old tan interior (pre-beachwood) I would definitely have to grab a set. The black just doesn't flow all that well with my interior!
I don't have the funds right now but if you ever do come out with one for the old tan interior (pre-beachwood) I would definitely have to grab a set. The black just doesn't flow all that well with my interior!
What color are you looking for exactly. I can't do a wood look, if thats what you meant. Thanks, Tom
Probably the tan color of the map holders on the doors of the beachwood/pre 86 light brown. Like I said I don't have the funds right now but if it turns out nicely I'm sure others will want it too.
I have a double din radio. If I sent you the exact dimensions of the hole for double din radios could you make one to fit them? I think the option of being able to upgrade easily to double din/navigation/touchscreen/Realtume ALDL readouts would entice people to buy these more. I would be happy to take pics of the install afterward. If you could make that size of a trim piece all people would need would be to move the little relay back there which is only a 20 second job.
------------------ 86GT Modded 3.4l V6/Getrag with Trueleo/Too many mods to list - 210WHP
1972 Honda CB350 Motorcycle For Sale - 80% NOS - 211 Miles
PM Me if you need: Interior/Exterior Parts Stock Switches/Bezels Gauge Clusters Body Panels Fiero Rotor Hubs for Brake Swaps Or custom fabricated parts! My prices are very low.
[This message has been edited by MadDanceSkillz (edited 07-22-2010).]
