Do to an increase of costs of vinyl I have to raise the cost from 55.00 to 57.50. The material has gone up 10.00 for me to purchase the vinyl. I am sorry about the increase but at least its only $2.50 and not something higher. I am doing my best to keep costs down as much as I can. Thank you for understanding
Canada orders will be 82.50 as It costs 35.00 to ship there.
Fiero and Fiero GT and Indy Fiero are available in many colors. Please see the last page of this thread for the latest covers.
This is the new files to print. these are how the covers look going out now.
Thank You Tom
------------------
2006 BMW 330I 2009 Dodge Charger 2009 Dodge Challenger SRT8
[This message has been edited by Fiero Thomas (edited 06-15-2019).]
Originally posted by Fiero Thomas: Hey Marc got you covered here are the photos of what will be on them if you want to add the logo option to them. I dont want them to get messed up by the spare tire hold down so I am printing higher up on them.
Wow, I predict you will sell many of these! This will not be used daily.....shows only. Very smart raising the logo so the hold down won't interfere. Plus it'll be seen better because if you centered the logo in the middle the bottom of the shield may be in the spare tire well. When you line up the placement of the shield I'm sure you'll remember where the open seam is at the bottom so it stays at the bottom Check your e-mail "You Got Money"! Marc
These are very nice. I've got T-Top bags from Fiero Thomas and was happy with the work he did I'll wait to see how the final product looks with the logo. please post a pic of how it looks at the back as well.
Fiero In Paradise here you go. This toof close to 5 hours to complete. Lots of digitizing and testing to get the effect that I was looking for. The letters look like they pop off the cover. the rings are from the hoops and will go away.
Gokart here is your cover. I did a super white and a little thicker thread to make it pop a bit more.
I will get the rings all set tomorrow and looking to ship on monday. Hope you like them.
All I can say is WOW! I was concerned about the red on black, but the way you have it done, it really stands out nicely. This will be a really nice finishing touch, thanks so much! I'll post a pix when I get it.
Thank you all for the pluses on this prodject. I have now gotton my hands on a nice red that will work great as well better then the original that I had come up with. I will get a photo up later when I do a test on these to see how it will come out.
Originally posted by Fiero Thomas: Gokart here is your cover. I did a super white and a little thicker thread to make it pop a bit more.I will get the rings all set tomorrow and looking to ship on monday. Hope you like them.
Are you able to do graphics? I'm wanting one with Tweety leaning up against the Fiero emblem with 'Tweety GT' underneath it? I have a rough idea of the image somewhere, I'll see if I can find it.
Dan
[This message has been edited by DanFiero (edited 03-31-2008).]
Just having some fun tonight. Any intrest in this one? Here you can see the logo that will be going on the covers from now on. Can't wait to show you danfieros cover
Considering the price includes an absolutely great fitting cover, true embroidered letters/numbers, AND the cost of shipping, this is a really great deal! Truly adds that custom, unique look.
Thanks...I'll be ordering another one later for my 88GT!
What can you do for the DGP prototype car?? Maybe just large DGP in white?? Maybe half gold & half white like the car? Put some thoguht to it and I will buy one for it. Thanks,,Rick
I will kick it around tonight RIck and see what about doing the letters in half colors. I not I will see if I can jazz up the whit letters a bit. I will get back to you
Thanks and here are the letters that are on the window. I had Paul at Fiero Sails make them to the exact copy I made of the burn in the window tint. It is getting fresh paint shortly and a new windshield as this one cracked apparently from the T-Top install later. The shirt of this car shows the letters better. My damn hoster I see is shrinking my pictures so I edited the T-shirt in. Rick
[This message has been edited by SuperchargedV6 (edited 04-05-2008).]
Daredevil05 here is your cover. THis one was a tough one. To get to the final print I had to go through 10 yes 10 needles to make this one right. This is a tough design to do. I digitized this one twice and tried stitching at other angels to make sure it would be nice. The final was done using an imported needle that is the smallest that you can put in a sewing machine. The slightest off center puncture from the needle will cause it to break and or any tention from pulling on the string over the rated tention. There for 10 needles pooped. 4 on the final print alone. I did 6 test prints at diffrent tention, speeds, and stablizer thickness to get here. I go this far as I dont want nothing but the best in quality to go out to the customer. My needles are imported from Germany and I think that it is worth it as they always provide the best quality. The Thread that I use for the Boots that I make come from there as well. So now here you go. There is 15,000 stitches in this one. Daredevil please post so I can leave you feedback. This photo is not taken dead on or the flash blinds out the cover.
Have a great night all and now on to your Rick. I have a test done but going in a diffrent route.
Here you go Rick. This is in the correct font for your car. This could only be made with one color however do to that I had to make this like a photo as there is not a font like this in all the software that I use. Hope you like it