PM sent.

New visors would make my 88GT perfect.

Just checked on it and that is alot of data for a small area. The overlaping would be the issue I think on that one so I dont think I will be able to do that one. I ran a simulation on the logo and there is to much going on for the room that I can put it. Sorry. I would still love to make you a set. I am sure that we can come up with something.

------------------

Indy#64~FieroNews~Boots~Bag s~Wallets~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

Ok. Was just wondering. I have some hats with it embroidered on it, so I thought maybe it could be done.

How about without the heart and put the Fiero logo beside it? That may work....

Suede with carbon fiber trim visors



What do you think?

------------------

Indy#64~FieroNews~Boots~Bag s~Wallets~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

lol... I think i need to start saving for another set...

=todd=

Visors installed!

I have 5 boxes shipping out tomorrow. This will leave me with three orders to finish. I am almost all caught up.

Nice to see the visors in there BOH. Cheers

------------------

Indy#64~FieroNews~Boots~Bag s~Wallets~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

[This message has been edited by Fiero Thomas (edited 05-31-2009).]

I got my visors and they are nice.
Is the passenger side suppose to have an exposed screw?
I never looked when I removed them.
Sparx22

[This message has been edited by sparx22 (edited 06-04-2009).]

I am am now having issue with mounting the visors on the pivot arm. Does the material need to be cut to get the mount on the visor?
If I slide the shaft thru the open slot as per construction the end of the visor collapses.

Thomas must be away, he does not reply to PM's.

Sparx22



Edit 6-6-09
Got it done.

[This message has been edited by sparx22 (edited 06-06-2009).]

Thank you for the visors you covered, excellent work. I've sent you visors as discussed for a 95 Intrepid. Please let me know if you can accomplish. In addition, it looks like you again are doing stitching for the monogram. Is this option available again, I would like to have this done?

Dan here are your visors. Thank you for letting me give them a shot. I am trying to do other forms of visors and this was a good learning. Your order is being boxed up to ship.





SO IF YOU HAVE OTHER VIDORS TO DO LET ME KNOW I WOULD LIKE TO GIVE THEM A SHOT!!!!

------------------

Indy#64~FieroNews~Boots~Bag s~Wallets~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

how difficult is the headliner to replace?

quote Originally posted by grkboy707: how difficult is the headliner to replace?

3/10

sent PM about a trade and some work let me know if you are interested.

This visor here needs a partner and a car to go into since my se is gone.



Could that be your car. The set will go for 75.00 as there is a ton of work that goes into them.

------------------

FieroNews~Boots~Bag s~Wallets~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

i would like to get some sun visors from you was wondering though after i order them how long does it usually take you to make them and get them shipped out? i would like to order some within a couple days if possible

Since I am just about caught up I can ship same day I get your cores. I can have the parts that I redo set to go for when they get here.

------------------

FieroNews~Boots~Bag s~Wallets~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

Wow, those are sweet! I'd order a pair, but I never use my visors.... so, their awesomeness would go un-noticed... Keep up the nice work though!

thanks tom, sorry it took so long to post the pics! BTW the new headliner rocks too



thanks
=todd-

Wondering if you figured out how to do the pockets? I kinda wanted to keep them looking stock (88gt) and the pockets are nice to hold toll tickets and such (storage space in the Fiero is a premium)...

Also, if I have mine done, can I supply the material? Whem I bought my headliner fabric, I got an extra 1/2 yd so the visors would match perfectly...

quote Originally posted by ALJR: Wondering if you figured out how to do the pockets? I kinda wanted to keep them looking stock (88gt) and the pockets are nice to hold toll tickets and such (storage space in the Fiero is a premium)... Also, if I have mine done, can I supply the material? Whem I bought my headliner fabric, I got an extra 1/2 yd so the visors would match perfectly...

You can supply your own material if you want to. That is not an issue, but I still dont do them with the pockets in them. to many issues in doing them sorry.

Tom

------------------

FieroNews~Boots~Bag s~Wallets~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

[This message has been edited by Fiero Thomas (edited 11-06-2009).]

quote Originally posted by Fiero Thomas: You can supply your own material if you want to. That is not an issue, but I still dont do them with the pockets in them. to many issues in doing them sorry. Tom

Thanks for the quick responce...
When you recover them, do you also replace the rigid material inside? How much would I be saving if I supply the fabric (its headliner material w/ 3/16" foam backing)?

Thanks,
AL

bump

------------------
1986 Fiero GT 1992 Subaru SVX 2005 Cobalt with a twist

FieroNews~Boots~Bag's~Walle ts~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

Hey Tom,

When you recover / rebuild the cores, do you install new hardware - like the plastic bushing in the pivot end and the "knob" on the other end? Looking for a set in black vinyl w/silver or grey stitching. Also, could you embroider a Silver or light grey Emblem similar to the attached pic in the centers? Say maybe 2 or 3 inch's high? What would those cost me? Thanks in advance.

Pat

quote Originally posted by katatak: Hey Tom, When you recover / rebuild the cores, do you install new hardware - like the plastic bushing in the pivot end and the "knob" on the other end? Looking for a set in black vinyl w/silver or grey stitching. Also, could you embroider a Silver or light grey Emblem similar to the attached pic in the centers? Say maybe 2 or 3 inch's high? What would those cost me? Thanks in advance. Pat

PM sent

------------------
1986 Fiero GT 1992 Subaru SVX 2005 Cobalt with a twist

FieroNews~Boots~Bag's~Walle ts~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

Here is a set on its way out with a headliner kit. These are in a formula t-top and made so the stitching can be seen when the tops are off.

------------------
1986 Fiero GT 1992 Subaru SVX 2005 Cobalt with a twist

FieroNews~Boots~Bag's~Walle ts~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

I have a set of light grey ready to go. I will do them for 49.99 shipped to you in the US

------------------
1986 Fiero GT 1992 Subaru SVX 2005 Cobalt with a twist

FieroNews~Boots~Bag's~Walle ts~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

Here is a set of grey vinyl that is on its way out.

------------------
1986 Fiero GT 1992 Subaru SVX 2005 Cobalt with a twist

FieroNews~Boots~Bag's~Walle ts~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

Hey! Visors look great! Would I be able to get a set with the Ferrari logo on them??? Let me know. Thanks!

Thomas,
Hey man how ya doin? I am looking forward to getting all of the cool products I ordered from you. Any idea how much longer it is gonna be so I can kinda plan how I am gonna do the interior mods on the car. Got it running real nice and did a full tuneup and replaced the master and slave cylinder. Getting ready to start sanding the car and prep for paint... peace man...

Pete

quote Originally posted by Pete Matos: Thomas, Hey man how ya doin? I am looking forward to getting all of the cool products I ordered from you. Any idea how much longer it is gonna be so I can kinda plan how I am gonna do the interior mods on the car. Got it running real nice and did a full tuneup and replaced the master and slave cylinder. Getting ready to start sanding the car and prep for paint... peace man... Pete

Im working on your stuff and hope to have the majority ready to go this weekend. I will keep you posted.

------------------
1986 Fiero GT 1992 Subaru SVX 2005 Cobalt with a twist

FieroNews~Boots~Bag's~Walle ts~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

Thomas,
That is great news, please understand I am not in any hurry. Take your time and do your usual good job and I will wait patiently here.... The car is not going anywhere and I still have a lot of work to do on it yet. Just saw this post and thought I would check in with ya.... Peace

Pete

Bump for a save to favorites

quote Originally posted by Fiero Thomas: This visor here needs a partner and a car to go into since my se is gone.

Tom
the blue along the edge is what i was thinking of only in a red wtht e rest in black carbon.

Tom,

Got 'em and got 'em installed. Perfect work as always ^5 to you for another great job.

Will

Hi,
Just curious as to which side the logos are printed on. Are they visible when the visor is up or down?

Thank you

They can be done either way. you just have to switch your visors and they will go the other way.

------------------
1986 Fiero GT 1992 Subaru SVX 2005 Cobalt with a twist

FieroNews~Boots~Bag's~Walle ts~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~

[This message has been edited by Fiero Thomas (edited 04-03-2010).]

What is the procedure if you don't have any old ones to send in?

Thank you

you can check on the forum to see if anybody has a set of cores they will sell you then have them ship them to me.

------------------
1986 Fiero GT 1992 Subaru SVX 2005 Cobalt with a twist

FieroNews~Boots~Bag's~Walle ts~Headliner~Spare Cover~
Visors~Sunshads and T-Top Sunshades~Download the Fieronews Catalog HERE~