Fiero2m8 - The Fiero Room parts for sale by Fiero2m8
Started on : 03-16-2009 11:18 PM
Replies : 366 (13553 views)
Last post by : jjd2296 on 05-07-2017 08:39 AM
Sep 4th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
quote Originally posted by Carrolles: Reference: #32 and #89 Do you know if the brush/switch assemblies are good in them? Can you tell me if they are driver or passenger side units?
The driver side just needs the plastic gear for sure.
The other one - (passenger side I think) doesn't operate at all when power is applied to it.
If I can find it, I might have a third one in unknown shape.
Sorry for being vague, but I'm recovering from knee surgery and can't get into the basement on my own yet to confirm my memory...
12:16 PM
doublec4 Member Posts: 8289 From: Oakville, Ontario, Canada Registered: Jun 2003
quote Originally posted by Fiero2m8: Hi Chris - no I bought the HT Motorsports kit and the adjustable coilovers are installed on the Roadster that is for sale. If I end up parting that out, I'll let you know as I don't have extras. The tie rods ends I have are rough shape from when I installed replacements.
Thanks Ryan, if you part, please let me know. I would be more than interested.
01:04 PM
Sep 8th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
quote Originally posted by doublec4: Thanks Ryan, if you part, please let me know. I would be more than interested.
Chris, the Roadster is sold, but I have a stock upgrade set of aftermarket 84-87 front and rear swaybars you might be interested in...
04:28 PM
Sep 25th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
Trans AM GTA vent for your Fiero hood now available...more stuff to be added shortly.
12:15 PM
doublec4 Member Posts: 8289 From: Oakville, Ontario, Canada Registered: Jun 2003
quote Originally posted by Fiero2m8: Chris, the Roadster is sold, but I have a stock upgrade set of aftermarket 84-87 front and rear swaybars you might be interested in...
Ah thats too bad, I already purchased some from Sourmug a few weeks ago. What aftermarket bars are these though just out of curiosity? Please pm me
11:38 PM
Sep 26th, 2009
Erik Member Posts: 5625 From: Des Moines, Iowa Registered: Jul 2002
quote Originally posted by Fiero2m8: Trans AM GTA vent for your Fiero hood now available...more stuff to be added shortly.
PM me please with a price ..thanks
02:41 AM
Sep 29th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
SOLD
Here's the performance upgrade sway bars for 84-87 - I think Addeco.
Both the front and rear bar come with poly sway bar mounts and the rears also come with poly links.
[This message has been edited by Fiero2m8 (edited 12-26-2009).]
09:25 PM
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
Another new item:
GM TECH I
Own and use the Scanner/Diagnostic tool GM techs use on your OBDI ECM's.
Plugs in cigarette lighter and PC cable attaches to 12 pin ALDL connector behind your lighter trim plate.
Works on all stock Fiero's and any GM ECM that uses an OBDI (roughly mid 90's and older).
$600 seems to be the going rate on ebay, I'm offering for $500 firm to the Fiero community first.
09:34 PM
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
The door skins and front fenders are SOLD (actually I'm using them on my project).
If anyone wants the Bubbajoe fenders with mini cooper marker lights, send me a PM.
Your chance to own part of the bubbajoe project
------------------Indy Northstar-Stretch ~ LT1-NOS Roadster
10:10 PM
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
SOLD - Asking $125 for the Alpine V12 DC Straight 4/3/2 Channel Amplifer Model MRV-F401
[This message has been edited by Fiero2m8 (edited 01-21-2010).]
10:14 PM
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
NEW 6" Speaker grills with mounting clips
$15 plus shipping
10:20 PM
PFF
System Bot
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
Sail panels from the 86 Roadster project:
$75 for pair
10:27 PM
Oct 6th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
SOLD
Taking offers on these Corvette brake adapters for 84-87 front suspension.
[This message has been edited by Fiero2m8 (edited 11-02-2011).]
12:19 PM
Oct 18th, 2009
CheshireGrin Member Posts: 693 From: Windsor,Ontario,Canada Registered: Oct 2006
For the V6 intake parts- Do you have the canister where the airfilter goes? if so does it have the little sensor thing? would it be possible to ship ? Thanks for your time Ryan
08:50 PM
Oct 19th, 2009
Felix The Cat Member Posts: 63 From: Kendal, ON, Canada Registered: Jul 2009
PM Sent
09:30 AM
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
SOLD
[This message has been edited by Fiero2m8 (edited 12-26-2009).]
08:10 PM
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
quote Originally posted by Felix The Cat: PM Sent
Shipping was very expensive.
PM replied with price delivered.
I'll take $50 less if you pickup.
08:18 PM
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
Guys I updated page one list as more stuff sold and I needed a few things for my own project.
Here are a few more items for best offer:
[This message has been edited by Fiero2m8 (edited 01-25-2010).]
08:21 PM
Oct 20th, 2009
CheshireGrin Member Posts: 693 From: Windsor,Ontario,Canada Registered: Oct 2006
quote Originally posted by Fiero2m8:
That would be the one im looking for...Pm me if you find it or another one
Ryan
12:10 PM
Oct 26th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
I have a stock 84-87 front sway bar with mounts now available for those who want to add one as a rear sway bar. $60
06:36 PM
doublec4 Member Posts: 8289 From: Oakville, Ontario, Canada Registered: Jun 2003
07:09 PM
PFF
System Bot
Oct 28th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
quote Originally posted by doublec4: Are those louvers for the rear window?
Yes Chris.
07:40 PM
Felix The Cat Member Posts: 63 From: Kendal, ON, Canada Registered: Jul 2009
PM Sent
10:23 PM
Nov 2nd, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
Nov 3rd, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
Page 1 post updated as front springs are sold.
08:07 PM
Nov 9th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
Rubber suspension bushings sold pending payment...
12:45 PM
ALJR Member Posts: 3765 From: Massachusetts Registered: Jul 2009
Got a better pic of those gray door sill trim pieces? And is shipping out of the question? Do you also have the gray seat recliner covers (left/right) and a pass seat recline lever?
01:35 PM
Nov 11th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
quote Originally posted by ALJR: Got a better pic of those gray door sill trim pieces? And is shipping out of the question? Do you also have the gray seat recliner covers (left/right) and a pass seat recline lever?
Missing two screw caps but otherwise very good.
I worry about cost and possible damage when shipping from Canada, but no not out of the question.
The seat parts I already swapped into my project as mine were broken too.
10:07 AM
Nov 16th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
Update - all remaining items from page 1 are now best offer
11:41 AM
Nov 22nd, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
A few new arrivals:
All 84 Stock front suspension parts from the Indy project:
Crossmember
Control arms
Steering rack
Shocks
Lowering springs
Sway Bar
Will part out since it's all disassembled:
Also a plastic liner for those that don't want to cut a hole in theirs for a battery tray...
SOLD
Best offer plus shipping on everything.
If you need pics of anything, let me know.
Fiero2m8
[This message has been edited by Fiero2m8 (edited 11-02-2011).]
11:42 PM
Nov 30th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
Updated as V6 Filter can is sold.
[This message has been edited by Fiero2m8 (edited 12-02-2009).]
09:33 AM
PFF
System Bot
Dec 2nd, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
A couple new items:
Used 88 front wheel bearings (since they stopped manufacturing new ones...)
84-87 Lowering springs (not cut)
05:32 PM
Dec 3rd, 2009
FIEROFLYER Member Posts: 3974 From: Registered: Oct 2002
How much for the front 84 to 87 lowering springs and do you still have the after market front and rear sway bars. Dan
06:56 PM
Dec 4th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
quote Originally posted by FIEROFLYER: How much for the front 84 to 87 lowering springs and do you still have the after market front and rear sway bars. Dan
Hi Dan,
Springs are 80 for the pair.
Sway bars sold.
I just missed you as I was in Peterborough Sunday.
02:16 AM
FIEROFLYER Member Posts: 3974 From: Registered: Oct 2002
Do you know what the spring rate is on the lowering springs as I want to lower my front end but not make it too stiff. Thanks Dan
02:45 PM
Dec 5th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
quote Originally posted by FIEROFLYER: Do you know what the spring rate is on the lowering springs as I want to lower my front end but not make it too stiff. Thanks Dan
I don't have a # for you but they are softer than stock springs with one coil removed because I tried both on my Fiero.
02:12 PM
Dec 10th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
Bump for the christmas shoppers
09:19 PM
Dec 26th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
I decided to keep the 88 hub bearings but everything else pictured still available.
12:00 PM
azmelter Member Posts: 33 From: Glendale,Arizona,USA Registered: Dec 2009
How much for rear view mirror,side marker ligths and grey door sill trim shipped to 85308 ?
09:05 PM
Dec 28th, 2009
Fiero2m8 Member Posts: 1928 From: Niagara, Ontario, Canada Registered: Feb 2006
quote Originally posted by azmelter: How much for rear view mirror,side marker ligths and grey door sill trim shipped to 85308 ?
$10 per item plus $25 shipping from Canada.
09:17 PM