I just finished the prototype and they are ready to produce. These are covered in Black Carbon Fiber Vinyl.

I have the usual colors of Carbon Fiber Vinyl available beside the Black, or just about any other color Vinyl, and I can do the French Seam Stitching in a contrasting color.





I'll need your armrests in exchange and the intro cost is $55 shipped for the pair with exchange.

Question, Comments, Suggestions are always welcome

Russ
www.rwupholstery.com

WOW those look great, and would match perfectly to the carbon fiber sunroof panel you did for me.

Question, how do you attach these back to the door? From the pics it looks like the holes are covered up...

Another great looking part

Ken~

yes have to agree look amazing. 20 times better than stock look good job

Thanks. They attach with the stock screws and holes. The top screw is covered with the square button that's already there and I'll supply the buttons to cover the bottom holes. I just didn't cut the holes before I snapped the pic



Russ

Russ, looks great! Any installed pics?

Man you do nice work Russ

Dr. W.

------------------
Is your Fastback GT's trunk seal shot? My Gen III replacement GT trunk seals with solid molded corners are now in production. $95 + $15 flat rate shipping to the US (contact me for international shipping rates) or buy two and pay only a single shipping rate! More info can be found here GT Trunk Seal Project

You have a PM

------------------
"I'm not driving too fast, . . . I'm just flying too low."

Work done 07-08 | Work done 08-09 | Work done 09-10 | Work done 10-11 |Work done 11-12 |
4.9 ongoing project |Parts for sale

Falcon - PM replied

Here is a pic of the armrest installed



I have a few sets of stock armrests in my inventory, so as orders are received I will make them and ship them out, that way when you receive the covered armrest you can send yours back in the same box. This way your car won't be without armrests.

Russ

I really wish these could be done in leather.

Can you do them in leather? I have a Indy that needs the arm rests recovered.

------------------

88 Coupe: 2.0L Turbo 4 Cylinder
84 Indy #64: Restoration Project!

TTT

[This message has been edited by 87GT2M6 (edited 10-17-2011).]

If you can do leather, I'm in as well.

------------------
Is your Fastback GT's trunk seal shot? My Gen III replacement GT trunk seals with solid molded corners are now in production. $95 + $15 flat rate shipping to the US (contact me for international shipping rates) or buy two and pay only a single shipping rate! More info can be found here GT Trunk Seal Project

Not doing leather currently as cost wise as they would be in the $200+ range per pair and I'm trying to keep the price down for most to afford

However I'll look into the true costs involved, and see if I can make it work for those interested

Russ

[This message has been edited by Russ88TTop (edited 10-17-2011).]

Never cease to amaze me Russ. Can't wait till the RottinChop gets done so we can get it up to you and see what you can do!

Very impressive work! I'm waiting to see the next thing you dream up. Recovered console and shift surrounds? Custom door panels?

TTT

------------------

[This message has been edited by 87GT2M6 (edited 10-17-2011).]

John - Ready for that challange
ZarZ - Thanks for the kind words, console's and shifter surrounds are already available - door panels are on the future to-do list

Russ

I spoke with a few more of my suppliers and crunched some numbers for those interested in having the leather option. I can recover them in Black Leather for $160, other colors will be slightly higher. However I'm still going to require three orders as posted above

Black Leather Commitments -- 2

Russ

[This message has been edited by Russ88TTop (edited 10-19-2011).]

PM sent.

------------------
Is your Fastback GT's trunk seal shot? My Gen III replacement GT trunk seals with solid molded corners are now in production. $95 + $15 flat rate shipping to the US (contact me for international shipping rates) or buy two and pay only a single shipping rate! More info can be found here GT Trunk Seal Project

What kind of re-conditioning do you do if the foam along the top of the armrest is starting to break down?

Ok, are we talking black leather? If so, I'll go in for a set. Consider my post as a confirmation.

Will - received, I'll respond shortly
a_bartle - I clean the area, Gorilla glue, clamp and they look like new before I cover them
mptighe - I'll be in touch, Thanks

Russ

Taking leather orders now!

[This message has been edited by 87GT2M6 (edited 10-18-2011).]

Very nice work!! cant wait to get more done.

Tyler

Can you do the color of the Indy leather?

quote Originally posted by johnyrottin: Can you do the color of the Indy leather?

I need Indy arm rests recovered too.

I can do them in White Vinyl or Leather. Just to let everyone know, there are several other colors of the Carbon Fiber and I can come very close to the Grey, Tan and Beechwood colors used on the armrests, both in Vinyl and Leather.
The cost of the vinyl one's are still $55 and Black Leather is $160, The other colors in Leather will run $175.
I have two interested in Black leather, but no payment's so far.

Russ

When do you expect to send mine?

------------------
"I'm not driving too fast, . . . I'm just flying too low."

Work done 07-08 | Work done 08-09 | Work done 09-10 | Work done 10-11 |Work done 11-12 |
4.9 ongoing project |Parts for sale

TTT

------------------

Free Bump. Just cause I was here.

------------------
Gary W. Patterson
Raven88
88 Fiero
86 Fiero GT

PM sent Russ

I'd be interested in Black Leather ones. I can ship you a set of armrests to cover.
shoot me a PM when you have a chance!!!

These went out today, Black C/F look with Red stitching



Russ

------------------

I too would be interested in leather, unfortunately it is not in my budget right now...

[This message has been edited by deloreanant (edited 11-04-2011).]

TTT

Russ, I'm very interested in a set of black leather armrests. Would you be able to make a set and send me the leather covers and I'll cover my existing arm rests myself? I only ask as shipping between Canada and the US can get expensive. Please let me know...thanks.

Eau - PM sent

Bump