I replaced this steering wheel with one that I had professionally recovered. This one is in good condition, no wrinkles, still firm and most importantly, it has no brown ooze. There are a few spots where the paint has chipped away as shown in the photo. 25.00 + shipping. (SOLD)


The K&N Filter below was purchased for my cold air intake - however I used a longer/smaller diameter one in its place. The filter part number is RD-1450 has never been used, and cost 55.00 new. Asking 25.00 plus shipping. Specs below:

Part RD-1450 Product Specifications
Product Style: Round Straight Universal Air Filter
Filter Material: Cotton Gauze
Flange Inside Diameter: 4 in (102 mm)
Flange Length: 1 in (25 mm)
Flanges: 1
Flange Type: Centered
Height: 6 in (152 mm)
Outside Diameter: 7 in (178 mm)
Top Material/Finish: None
Top Style: Rubber
Filter Re-Oiling Amount: 1.48 oz (44 ml)
Inner Wire: No
Weight: 2.1 lb (1 kg)
Product Box Length: 8.13 in (206 mm)
Product Box Width: 8.13 in (206 mm)
Product Box Height: 8.75 in (222 m

[This message has been edited by topcat (edited 12-30-2012).]

PM sent.

Steering wheel sale is pending. K&N filter still available.

K&N is still available.

Will it fit a stock fiero housing? ( i am Away from the car and can't measure)

This will not fit the stock housing, as it was made for a cold air intake setup.

I received the steering wheel today, and I am very happy with it. Thank you!

Great. Sending it parcel post got it there just as fast as Priority would have and it was six bucks cheaper.

Well, the K&N filter is collecting dust. The new price - Free. You pay shipping, and it is yours. I initially bought the filter to use as a cold air intake, but ended up going in a different direction.

PM me if interested.

PM sent!

I got a pm from someone else before you responded. I will place you second in line in case the first person falls thru.

Payment sent. Thanks

Package mailed. Tracking info sent via pm