I recently bought a vinyl cutter/plotter and have been cutting stuff for friends. Would there be an interest around here? Maybe club decals, graphics, stripes, etc.

I'm not making a living doing this, more of a personal need at first. The machine was cheap enough, and I got tired of spending $20 on a decal that cost $2 to make.

I have a few dozen rolls of various colors, and can gut just about anything in one color.

Let me know!

------------------
84 Fiero V6 4 speed
11 Camaro SS/RS LS3 6.2
13 Traverse LS 3.6
12 Silverado Z71 5.3
12 Tahoe LT 5.3
64 Lincoln Continental 7.0

pm sent

pm sent!

That's pretty cool! Bookmarking this in case the need arises in the future

Pm sent.

I need some smaller ones that said "NO BAIL OUT EDITION" for my Ford truck in a light bronze or brownish so they look like my 4X4 sticker. Rick B

Here is the sticker I want

http://www.f150forum.com/f3...ition-decals-162204/


But something to blend nicer with this color.

[This message has been edited by SuperchargedV6 (edited 07-29-2013).]

Can you do the original "Fiero" decklid font or something close like the hemihead font? I could use a "Fiero 2M8" or "Fiero 4.9" decal in medium or light gray for my rear decklid. Might even pay for a set of "Formula" decals if you're willing.

-Gary

I believe I have the fiero font. I'll make sure I can resize it without it blurring out.
I am back to work in the morning, so I'll work on getting everyone taken care of in the evenings. I didn't expect this many replies, emails, and PM's!
I'll get to everyone that is interested as soon as possible.

Thanks!

------------------
84 Fiero V6 4 speed
11 Camaro SS/RS LS3 6.2
13 Traverse LS 3.6
12 Silverado Z71 5.3
12 Tahoe LT 5.3
64 Lincoln Continental 7.0

Glad it's helping you moving from General Fiero Chat to The Mall.

PM Sent on Sunday.

How much for some decals for the rear deck lid to replace the 2M4 or 6 with 2ML67 and some kind of nice 3800 Super charged decals for the bottom of the door about 2 inches high. Thanks Dan

------------------


DARN Cars now open with
Over 30 years wiring experience between cars and trade as an avionics technician in both Canadian Air Force and civilian aviation.
Over 25 years experience building and modifying cars.
Over 10 years of full Fiero engine swaps and harnesses building and still going.

I have the font, just gotta upload it to my cutter. I am also getting material that is close to the factory colors, along with black, white and some standard colors.

i will be needing a bunch of stuff like the 2.8 and gt stuff as soon a i near the end of my project

I don't have a GT (yet) but what about this? To refinish '86-'88 GT tail lights you have to mask the word PONTIAC over a light box and then mask the tail light area and then paint. What about offering a "kit" of precut lettering for GT owners to mask their tail lights with. Peel and stick the letters, peel and stick the lens sticker, paint, and then peel off the vinyl. No more tedious cutting with a razor blade or Xacto knife.

How about just the 2M4 part of the rear sticker in red?

If possible I would like a top windshield sticker "Pontiac" that was common in the late 80s early 90s in white same font and size as they where....

Lots of replies and PM!
I am getting everything together to make everyone's decals.
With a few exceptions, It looks like Red, Silver, White, and Black are the most popular colors.
The common decals I will cut up and have ready to ship hopefully in a few days.
Anything custom will take a little longer.
I am working on a price list also. These will be extremely reasonable.
Pretty much the material cost, and a couple bucks for my time.

I'll post a new thread in a few also. I have to equipment available to make custom T-shirts with just about anything printed that you might want. If you are looking for a big order (2-3 dozen) it will drop the cost down a lot.

More to come!

------------------
84 Fiero V6 4 speed
11 Camaro SS/RS LS3 6.2
13 Traverse LS 3.6
12 Silverado Z71 5.3
12 Tahoe LT 5.3
64 Lincoln Continental 7.0

Bumping this up.
Still tweaking a few of the vectors.
I have the FIERO and the 2M4 ready to go in Black, Silver, and Red.
I should have the others tuned in by this weekend.
Here is what I am finishing...
FIERO 2M4, 2M6, 2M8, 4.9, FORMULA, PONTIAC
The specialty requests are in the works also. (hunting for bronze vinyl!)

------------------
84 Fiero V6 4 speed
11 Camaro SS/RS LS3 6.2
13 Traverse LS 3.6
12 Silverado Z71 5.3
12 Tahoe LT 5.3
64 Lincoln Continental 7.0

Bronze will work. Thank you. Rick B

quote Originally posted by FIEROFLYER: How much for some decals for the rear deck lid to replace the 2M4 or 6 with 2ML67 and some kind of nice 3800 Super charged decals for the bottom of the door about 2 inches high. Thanks Dan

I like this in a silver or what ever

I think I have answered everyone so far. Please let me know if I forgot someone. Feel free to email me, or if you would like to give me a call, send a PM for my number.

Finishing up all the orders in the next day or so. Some are ready to ship.
I have a few from my practice runs that are ready to go also.
I have "Fiero GT", Fiero, Fiero 2M4, 2M6, and 2M8 cut in White, Silver, and Black. $5 shipped.
If you just want the 2MX part, 2 for $5.
I can give a little discount for multiple orders if they will fit in the envelope.

The "Supercharged" font is ready also. (The same one used on the 3800 engine cover.

Mine arrived and are on. Greatly appreciated for finding a color better than white. I love um. Rick B

Got mine today! They look great. Thank you!

[This message has been edited by FieroMaster88 (edited 08-10-2013).]

Glad you guys like the decals!
Let me know if you need anything else.
I'm still working on some of the customs ones.

------------------
84 Fiero V6 4 speed
11 Camaro SS/RS LS3 6.2
13 Traverse LS 3.6
12 Silverado Z71 5.3
12 Tahoe LT 5.3
64 Lincoln Continental 7.0

I'm just happy there was an extra as I put the drivers side on slightly crooked and I know it is going to bug me until I fix it. The one below I bought on Ebay last month and I know there is a market for these in a differnt style. Seems these are a hair to small. Also I was only able to get them in Silver or Red or mixed like I got. They will do for now. Rick B

I got my Pegasus decal in. Very nice.

PM sent and man just wanted to say that is some awesome work and just keep at it, it looks great!

quote Originally posted by indyguy888: I got my Pegasus decal in. Very nice.

Thanks!

Weekend bump.

Email or PM any requests that you have.

I'll have the FORMULA door decals done this evening.

Sent you a email and Design 2 weeks ago still havent heard from you back on it

replied.

quote Originally posted by SuperchargedV6: I need some smaller ones that said "NO BAIL OUT EDITION" for my Ford truck in a light bronze or brownish so they look like my 4X4 sticker. Rick B Here is the sticker I want http://www.f150forum.com/f3...ition-decals-162204/ But something to blend nicer with this color.

That is too friggen funny!
I would love a small "PRE BAIL OUT EDITION" on my 85GT.

[This message has been edited by partfiero (edited 08-18-2013).]

Let me know the color, font, and size that you need.

Everything has/will be shipped out by tomorrow morning.
If there are any other decals needed, PM me.
Windshield banners are complete.
All decklid variations are complete.
Fiero logos, fiero-bird, etc. are ready to cut.

Formula decals are still coming out a little shaky.
Still working on those.

Colors available right now.
White, Black, Flat Black, Red, Silver, Charcoal(limited size)

How big of vinyl can you create? Can you do something that is currently on my car?





Eventually my car needs paint and since I like this decal/strip, would like to have a replacement. Anyone else ever seen this design on a fiero?

I can do that. If you can get a clean pic from the side, it shouldn't be too hard. I can change the fiero to the correct font also. Let me know.