This is not my sale, just helping a friend. He owns a hot rod shop and has decided to sell off his Fiero projects. This thread is for his 86 GT w/ 3800SC installed, but not finished. A complete harness is included so the wiring is done for you, it just needs to be installed. For the most part, what is left is the plumbing (coolant, fuel) and those related systems.
Background on the motor/trans. He purchased a 98 Grand Prix GTP with a running motor, but bad trans. He brought the car to a trans shop, had them fix it, and then drove it around to make sure it all worked. After getting the motor/trans all figured out, he pulled it and then installed it in his 86 GT. Being a Hot Rod shop, he and the guys centered the motor/trans on the cradle and created the motor mounts, putting the motor/trans in the center of the cradle, so now it has equal size axles on both sides. Next they created the exhaust using a set of headers made for a GP. The ends were cut off, and shortened to make the bends fit. It is a work of art, and if I owned it, i'd keep the trunk floor open to show it off. He has some extra parts and misc stuff that will go with the sale.
** Edit - I was told that the seller has around $5K into this project so far. He'd like to get at around $2500 - $3000 for it, but if your serious, make contact and he'll work with you **
https://www.facebook.com/outlawsrc/?pnref=lhcEmail info@outlawsrc.com
http://www.outlawsrc.com/Phone 757- Four73-Three240
He will be watching this link, and will answer any questions you have.
Rob
[This message has been edited by qwikgta (edited 01-01-2016).]