Looking for a Fiero 85-88 Empty SHELL, Don't want the engine, don't want body panels, or Interior, just a Rolling Shell w/ column for a "Maybe Project". Must be located NEAR Ocala , Fla 34470 (otherwise shipping is prohibitive) Thanks

What about without rear cradle?
I just got an 87 to rep[lace my 85 GT. But the drive train, I'm keeping.
I got the 85 about 2 1/2 years ago. Cosmetically challenged. A little frame rail rust but not awful. Had put in an 93 3800sc then a 98 sc. Then someone hit it while parked. No metal damage, but took me 3 months to find the right rear bumper cover. Was starting to work on the rear clip. Then all I would have needed was a left tail light.
Well someone came through a stop sign. Taking out the front bumper cover, bumper egg crate, right fender, hood and put the bumper reinforcement just in front of the right inner fender. Of course crushing the metal there and ripping some of it off the space frame.
If it didn't need paint, a windshield, other panel work, if the inside was nicer and I had a place to keep it while doing the metal work I would keep it. Maryland has marked it as a savage title. I got about 8 weeks to strip it and get it out from where it is.
But the drive train, rear cradle, tank and wiring from the center consoll back is coming out. The dash sucks. The steering column I went through last year.
I also have 2 deck lids, hood and rear clip(notchie) I was going to put in.

[This message has been edited by cmechmann (edited 02-09-2015).]

I have an 86 GT parts car you can have. West of Lake City.

are you looking to 3D scan it?

2002z28ssconv is offering me one, If I can find the $ to "get it here", that would be "superb". Actually I'm wanting to "Chop the top".(was a bodyman for 40 years so "I think" I can handle it, done other types of cars) if it turns out ok, maybe I can do it for others who can't afford a major expense and cannot do it them selves.

what are you planning on doing about the windows ?

That's a bridge I'll figure out later, probably lexan.

I have an 87 gt 5 speed no engine car is cherry..I'd give u the car if your successful in doing chop top and do mine.I'll buy the lean..I'm in spring hill/ brooksville area 3523647645

2002z28ssconv is Giving me one. *thankyouthankyouthankyou* . After I get the Roof "Done", (might be awhile), I'll post results. Thanks

couple hours with mean green and a pressure washer, Body panels and Interior coming off tomorrow. thanks Chuck

I have a perfect one for you that is completely rust free...and it comes attached to a complete low mileage Indy to boot!

Already got one. thanks. couldn't deal with shipping fro Illinois anyway.

UPDATE : Chuck was good enough to furnish me with a starting point. This is what I started with, and after 5 days. top is down 3 1/2". The entire tail end will change and the rear (maybe front also) wheel openings will widen about 2". Not sure what the front grille work will be yet.

evolving.