I'm parting out my '86 GT, frame is rusted and front crossmember is bad. If you want the remaining titled chassis for a kit car, buggy, or whatever get in contact with me. Body panels are in decent condition, some small cracks from age but otherwise good. The car runs and was driving until the front A-arm mount broke. 2.8 V6 with 115K and 3 speed automatic.
I don't know the names of the parts so I looked them up in the p22 parts book. Here is what they call what I need ( at least some ) Fascia reinforcement Impact bar ( metal bumper ) Deflector ( air dam ) Radiator mount upper Thanks
I don't know the names of the parts so I looked them up in the p22 parts book. Here is what they call what I need ( at least some ) Fascia reinforcement Impact bar ( metal bumper ) Deflector ( air dam ) Radiator mount upper Thanks
The car is pretty rusted underneath so I will have to check if the metal parts are any good. I assume the fascia reinforcement is the grid shaped plastic behind the front bumper, I do have that. I will also have to check if the deflector is in good shape. I will send you a PM when I check them.
Well the fascia reinforcement is actually a thin metal part that goes across the front , and bolts to both the frame and the fascia. supports the back edge of the fascia where it meets the hood. tried to print a picture but file is a pdf and wont work with pip. edit found one part 26 I could also use part 44
[This message has been edited by kendallville (edited 10-16-2016).]
I will check as soon as I can on what parts I have. I only have about an hour each day after work before it gets dark so I may be a little slow to respond. So if anyone is waiting on parts please know I am working things out as quickly as I can.
No problem here take your time , Life comes first Fieros second. I work slow anyway, plus I work outside and it will snow soon and I will have to quit until spring.
