UPDATED WITH PICTURES

It's Bonaduces Blowout Bonanza, Everything must go, all sitting on shelves ready to ship. Give your Fiero a nice Christmas present. Don't waste your time scouring your local PnP. This is a complete (minus sheet metal, front cross member, and some parts sold previously) '86 notchy all disassembled, no hard work for you to do. $10.00 or less per part + shipping to your door. Body panels are pick up only, they cost a small fortune to ship. To many parts to post pics, can take if requested. PM is the easiest way to get me, as I check the forum several times a day. Also have dual exhaust tips off a STS, that were used in custom exhaust.

disclaimer: 3.4 Dohc + 5 speed still on cradle with axles is not included in this sale price. (price is negotiable, will not part out engine or tranny)


All Parts Must Go, see this thread for pictures of the car. https://www.fiero.nl/forum/Forum4/HTML/072515.html
It started as a '86 2.5, was converted to a 3.4 DOHC.
If you don't see a part listed, please ask.
If you want pictures of a part, please ask.
I check the forum several times a day, while at work, Sundays usually at night only.
If in the area and wish to pick the parts yourself, feel free, I can make arrangements.


Parts already sold: 120 mph IPC
Engine harness (3.4), ECM, coils and module)
Shifter assy.
complete center surround, plates, glove box
left front fender, sunroof plastic
shift knob
ebrake handle
map light lenses
headliner, rear speakers w/pigtails
headlight motors
front park/turn lamps
heater knobs, pw rockers
exhaust tips
engine vent covers
chassis harness
steering column
holley scoop

thanks for looking

Dan

[This message has been edited by bonaduce (edited 01-10-2017).]

Do you have any 88 rear calipers? Specifically driver's side

PM sent

quote Originally posted by DKcustoms: Do you have any 88 rear calipers? Specifically driver's side

no sir, only parts that came on an 86

Tail lights any good ? A picture would be most helpful.

All pm's replied to, trivit has pics sent to email on file

dan

Good gray seat covers? Piece that covers the lighter/ALDL?

quote Originally posted by Monkeyman: Good gray seat covers? Piece that covers the lighter/ALDL?

passenger side is ok, driver side bottom is ok, back is destroyed in normal spot. ALDL cover was sold with complete center section.
thank you for looking.

dan

Pm sent

v6 tach?

Also need the door gasket on the inside of the door opposite the driver's side mirror, and the screws to hold it down...

Also need a good condition lower door hinge assembly including spring tensioner.

[This message has been edited by lou_dias (edited 11-09-2016).]

quote Originally posted by lou_dias: v6 tach? Also need the door gasket on the inside of the door opposite the driver's side mirror, and the screws to hold it down... Also need a good condition lower door hinge assembly including spring tensioner.

No tach as car was originally a 2.5, Door gasket, I can check on that and the hinge when I get home this evening.

Do you have a driver's side front parking light?

------------------
'87 GT , '00 3800 Series II SC, 4t65e.

quote Originally posted by darbysan: Do you have a driver's side front parking light?

orange one in front bumper, yes.

thanks for looking
dan

[This message has been edited by bonaduce (edited 11-09-2016).]

PM Sent

all pms replied

pm sent

------------------
Pat Jones

quote Originally posted by 88FieroGT TTops: pm sent

replied

I need some Decklid vents.

quote Originally posted by nosrac: I need some Decklid vents.

Np, I can get you pics of them this evening and send them to your email on file.

dan

pm's replied

new year bump

I have misplaced mine and need a set of screws for the overhead light console/fixture.

Nelson

Still have the side intake scoop? Are seat belts still locking well? is the driver's side seat bottom cushion still available? If you can provide pictures of the seat, I'd appreciate it.

Thank you.

[This message has been edited by rice.1 (edited 01-06-2017).]

will check on items this evening and get pictures (sorry scoop was sold earlier and I forgot to update that), I can check my screw assortment I may have the screws. pm replied to

dan

[This message has been edited by bonaduce (edited 01-06-2017).]

rice.1
I sent you a picture of the seat bottom, to the email you have listed. Seat belts I can't remember if I saved them or not, I didn't see them on the shelf when I was in the garage but they could be in another section. I can check that tomorrow when I will be in the garage again.

Hnthomps
No luck on the screws.

thanks for looking

dan

Thank you. I replied to your email before I saw your response here, so I asked about your seat belts before I saw what you said.

[This message has been edited by rice.1 (edited 01-07-2017).]

update with pics
all parts work, caliper bolts have been broken loose and lubricated, slave cylinder has Rodney line and mr2 seal kit included



fiero store fuel tank straps, hood support


wiper motor, tranny, arms, and sunroof shield

misc interior, and digital oil gauge

all 3 ebrake cables

5 speed shifter cables

right, left, left headlight bucket

pedals, fuel door, rad fan

2.5 5 speed ecm

right door

left door

door and trunk lock set

86 2.5 bored .030 over

3.4 dohc and 5 speed on cradle