I have the entire guts and wiring harness and the switch for power mirrors for both doors. I took a photo of the driver side door and if you want the set I will remove the passenger side also. Please email me for photos. I do not know how to post photos on here. Handymanpat926@yahoo.com Thanks Pat
quote
Originally posted by Bubblhd90:
Pat, we are needing electrical window complete units for both doors on a 86 GT. Need the switch for the mirrors on 86 GT Need brake proportional valve for 87 GT
1987 GT 3800, getrag, intercooled, ZZP internals, Stainless headers 1987 GT 2,8 Getrag survivor all original 1986 GT 2.5 Auto daily driver 1985 2.5 plain jane bare commutor
I looked and looked. I know it was up in the front of the garage for the longest time and I may have tossed it out! It might turn up like a lot of things do, while I’m looking for other parts. Man, if you have asked about it a couple months ago I could have walked out and grabbed it. Thanks Pat
quote
Originally posted by Indy-453:
Hi Pat,
Would you have a fly wheel dust cover for an 84? Its a manual transmission car if that makes a difference.
Yes, that photo helped a lot. I do not have an old engine to grab one off but a buddy of mine might. I will ask him and let you know if he can get one for you. Thanks Pat
quote
Originally posted by Cunnive:
As you can see from the image above, the person is holding the camshaft thrust plate (stop plate as some may say) that fits to the camshaft.
I make sure to respond to everyone through pm. If I do not have what you need I try and refer you to people I know that have parts! You can also email me at handymanpat926@yahoo.com. Thanks Pat
I have been looking for a pair of wing stanchions for a 86gt. Would you have any? Or know where I could get a set?
I have a set but they are on a wing. I’m not sure I want to separate them all that much. Let me look around and see what I can come up with or maybe check with Larry Hubbert at lhubbert2@brighthouse.com Thanks Pat
quote
Originally posted by Birdman437:
I have been looking for a pair of wing stanchions for a 86gt. Would you have any? Or know where I could get a set?
I looked and looked. I know it was up in the front of the garage for the longest time and I may have tossed it out! It might turn up like a lot of things do, while I’m looking for other parts. Man, if you have asked about it a couple months ago I could have walked out and grabbed it. Thanks Pat
Thanks for checking Pat. The rain held off this morning and I made it down to the junk yard and found one before it turned into a mud bog.
I’m glad you got ahold of one, I feel bad that it may have gotten tossed out. I know it sat there in the front of my garage for so long and I’m sure it was out in the trash. Thanks again for letting me know Pat
quote
Originally posted by Indy-453: Thanks for checking Pat. The rain held off this morning and I made it down to the junk yard and found one before it turned into a mud bog.
I own 4 fieros and at this point I am pretty sure what I need to keep and what I need to give away and sell. Let me know what you are wanting and I will see what I have. I can get you photos and information about the parts I dont call this place "fieroland" for nothing! Let me know what you need. Thanks Pat Moody (Texas)
Hi Pat, I need the water pump hose for 1985 gt 2.8- 6 cylinder . Any chance you have one? Thanks, Bill Mahoney.
Those get ruined trying to get them off but I can take a look Can you get new from the fiero store or the auto parts store? Larry Hubbert might have something like that Lhubbert2@brighthouse.com QUOTE]Originally posted by Mr Badwrench:
Hi Pat, I need the water pump hose for 1985 gt 2.8- 6 cylinder . Any chance you have one? Thanks, Bill Mahoney. [/QUOTE]
Dang it! I was working all weekend straighting out this massive mess I have at fieroland and I did find some parts they guys are looking for but I did not look for your parts! I will write a note right now to look under my car to see exactly what your wanting and I kind of have parts in tubs that are similar or that kind of go together so it will not be difficult once I know what I’m looking for. I will look tomorrow after work. Maybe email me some photos of the parts if you can. I’m sorry about not looking. I will check for sure tomorrow after work. My email is handymanpat926@yahoo.com Thanks Pat
quote
Originally posted by Indy-453:
Hi Pat just following up if you have found it. Thanks
You won’t believe it but I just found that damned part! It was on top of a tub that was under my trailer! If you still need it please let me know. Thanks Pat
quote
Originally posted by Indy-453:
Hi Pat,
Would you have a fly wheel dust cover for an 84? Its a manual transmission car if that makes a difference.
Shout out to Pat for his excellent service and for going the extra mile when we thought there may be a problem with the postage. Without people like him people like me would be screwed for parts. Many thanks my friend and look forward to doing future business.
I might but if I did it would be just one and I may need to hang onto it for one of my cars. Is there a reason so many people want those? I have gotten requests for them many times in the past. Maybe check with Larry Hubbert at lhubbert2@brighthouse.com Thanks Pat
quote
Originally posted by Notchback Noob:
Hey Pat, do you have a brake combination (aka proportioning) valve? I don't think it makes a difference but its for an 86 v6.
Hello, I have an ‘85 SE V6 5-speed. Do you have the adjustable mirror controller? This is the Left/Right—Up/Down outside mirror controller switch that sits below my shifter on the center console and sits in the middle of my power window switches? Let me know. Cordially, Kevin Sullivan Ps. I need the compete assembly. A few days ago my mirror switch caught fire! (I guess it was real dirty). Therefore I had to quickly pull and disconnect the black and red wires that sit below the mirror controller. Mmmmm... now my done light is not working🧐
I noticed a while back that the fiero store sells them new for 50.00 Please check with them first. If not I will see what I can do. I know if I needed one and they were that cheap I would just get the new one. Thanks Pat
I actually think I may have a crankshaft bolt I’m not sure about the oil pump bolt, are there more than one? Are they different lengths? Will you email me at handymanpat@yahoo.com
Hi Pat. I need a piece of 62D pallex to repair the driver seat outer seat panel which is becoming threadbare and has a couple pinholes. The rest of the seat looks good.
I do not have the 62D pallex Only the 61E hallex Maybe check with with some of the other well know parts guys out there. I am running a special at fieroland on the muffler belts, buy 2 get one free! Now, in the case that this item you call the 62D pallex does exist then send me photos so I know what your talking about. Thanks Pat
