I might, let me look today, I am also supposed to be digging out a radiator shroud that I keep forgetting to grab. It's quite a warehouse of parts here but I know right where to look for your fuel rail. Will you please email me at handymanpat926@yahoo.com to prompt my memory to go out there this afternoon to see. Thanks Pat
quote
Originally posted by windex42:
Hi Pat, Do you happen to have a fuel rail for a 2.8 V6?
Hopefully in excellent condition? I'm looking for the fuel rail, and fuel block where the lines connect. -==- Nick
I do not have any, I sold one I had to a guy earlier this year so I'm fresh out. Maybe try Larry hubbert to see if he has one. Thanks Pat QUOTE]Originally posted by windex42:
Hi Pat, Do you happen to have a fuel rail for a 2.8 V6?
Hopefully in excellent condition? I'm looking for the fuel rail, and fuel block where the lines connect. -==- Nick[/QUOTE]
Donster, how are you! How is Germany? Yes, I have those clear lenses you can have for free, shipping to Germany will be costly enough! I gave a bunch of those little round screw covers to russ wormuth for his projects. I may have some left but I would need to to only want the minimum amount Please email me at handymanpat926@yahoo.com so I can get this all worked out. Thanks Pat
Doing better again, trying to stay out of the hospital. :-) Germany has been great for us, although we spend almost more time on vacation in other countries than in Germany. Anyway, sent you an email with my new APO AE US address.
I have them but because the little covers for that area at the back of the sail panel are so difficult to find I would want an obscene price for them. Maybe someone can 3 D print them? You can have the little river cover. Email your address and I will put it in the mail before I leave Wednesday morning. Thanks Pat Handymanpat926@yahoo.com
QUOTE]Originally posted by Freejer88:
I'm looking for: 1) one small rocker panel rivet cover 2) two quarter glass filler panel screw covers (the panel behind the quarter glass on a GT).
I have them but it would be two separate shipments. The good unwelded uncracked set of manifolds is 100 shipped The wind deflector is 50 shipped. I will be at the 40th so it would save shipping Thanks Pat QUOTE]Originally posted by Dukesterpro:
Hi there, I am looking for a sunroof wind deflector and a good set of v6 manifolds. Let me know thanks![/QUOTE]
You can just have the little screw cover. Email me your address and I will put one in the mail before I leave Wednesday for the 40th The other piece I have but it may not be beechwood, I would have e to make a note to look. I would have a couple grey ones. Check with Larry Hubert at lhubbert2@brighthouse.com about the beechwood ones. My email is handymanpat926@yahoo.com Thanks Pat QUOTE]Originally posted by Acroyer:
Hi Pat,
Looking for a couple of weird pieces. I need 1 seat belt bolt cover if you happen to have one in Beachwood. I would take 2 black ones if you happen to have those.
Also, I need the little insert thingy that covers the top-most door pull screw, driver's side. Seems I have two passenger side ones... Same color situation, please.
For an '88, if that makes any difference. Thanks![/QUOTE]
I think I have one, if I do and it is really nice it's 50 shipped I would need to look and get you some photos. If you email me at handymanpat926@yahoo.com I can send photos. Thanks Pat
quote
Originally posted by Dccarguy05:
Hey there, looking for a 88 Beechwood parking brake trim piece?
I have them but it would be two separate shipments. The good unwelded uncracked set of manifolds is 100 shipped The wind deflector is 50 shipped. I will be at the 40th so it would save shipping Thanks Pat QUOTE]Originally posted by Dukesterpro:
Hi there, I am looking for a sunroof wind deflector and a good set of v6 manifolds. Let me know thanks!
[/QUOTE]
Done deal, Can we look at shipping them when you return from the 40th?
I will have them out tomorrow before I go if you want. I would need to know tonight so I can get them out, cleaned, wrapped up and to the post office by tomorrow night. If you email me that's best, I have to sign in every time I get a message on here. I don't know how to make it work by my just clicking on the pennocks email. I used to be able to. Thanks Pat
QUOTE]Originally posted by Dukesterpro:
Done deal, Can we look at shipping them when you return from the 40th? [/QUOTE]
If I have one you can have it but I can't look until I get back from the 40th Maybe in the meantime check with Larry Hubert at lhubbert2@brighthouse.com Thanks Pat
quote
Originally posted by Freejer88:
Also, how about a driver side fender ground effects piece? Thanks in advance.
[ You will laugh but I was digging stuff out of the trunk of myb gt conversion car and found 2 of those little parts you need. Do you still need and want them? If so email me again at handymanpat926@yahoo.com QUOTE]Originally posted by Freejer88:
I'm looking for: 1) one small rocker panel rivet cover 2) two quarter glass filler panel screw covers (the panel behind the quarter glass on a GT).
I have one and will have it in the mail tomorrow with tracking . My email is handymanpat926@yahoo.com Do 25.00 to my PayPal. Thanks Pat
QUOTE]Originally posted by 30+mpg:
I need a park/lock cable for an automatic transmission. The cable runs from the ignition switch on the steering column to the shifter in the console. [/QUOTE]
Darn, I have 2 sitting on the shelf and was happy to let one go. I had figured I would send it out priority 16.00, and the other 9.00 would have been for driving it down to the post office. I felt I was giving it away for free If you lived close by I would have said to just stop by and grab one. Sorry about that Thanks Pat QUOTE]Originally posted by 30+mpg:
Sorry, but I found one on the internet for $20.[/QUOTE]
Hey there, Pat. I looked through the thread and may have missed details on availability of this, but do you have a VSS gear for a Getrag 5 Speed? Preferably the tooth count/color that was used on an 88GT. Thanks!
I have some vss laying on a shelf but I will have to see the tip colors I will look tonight Thanks Pat QUOTE]Originally posted by opucco:
Hey there, Pat. I looked through the thread and may have missed details on availability of this, but do you have a VSS gear for a Getrag 5 Speed? Preferably the tooth count/color that was used on an 88GT. Thanks![/QUOTE]
Darn, I have 2 sitting on the shelf and was happy to let one go. I had figured I would send it out priority 16.00, and the other 9.00 would have been for driving it down to the post office. I felt I was giving it away for free If you lived close by I would have said to just stop by and grab one. Sorry about that Thanks Pat QUOTE]Originally posted by 30+mpg:
Sorry, but I found one on the internet for $20.
The internet seller refunded my payment as they had already sold the cable, so you're up. How much to 72801 in Arkansas?
20.00 is fine. It may not go priority but I will get it out tonight. PayPal is handymanpat926@yahoo.com I will send tracking I'm glad it worked out. I save stuff like this for people and am happy they can use it! Thanks Pat QUOTE]Originally posted by 30+mpg:
The internet seller refunded my payment as they had already sold the cable, so you're up. How much to 72801 in Arkansas?[/QUOTE]
I do but email me for photos and pricing, I have two versions but want to talk to you before I decide what to do Thanks Pat
QUOTE]Originally posted by opucco:
Hey there, Pat. I looked through the thread and may have missed details on availability of this, but do you have a VSS gear for a Getrag 5 Speed? Preferably the tooth count/color that was used on an 88GT. Thanks![/QUOTE]
ahoo.com
