| quote | Originally posted by jibby212:
I am looking for an OEM manual axle for my 3800 swap. I have not been able to find one locally. If anyone has one to sell or know of a source, please let me know. |
|
Passenger side or driver side? If you are doing a stick swap both manual axles are retained and used. If you are doing the 4T65eHD the stick axle will fit the drivers side while the passenger side axle can be made up. Sometimes the passenger side axle can be made by using the Grand Prix drivers side axle bar and the Fiero CV ends.
------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE " [This message has been edited by Dennis LaGrua (edited 06-20-2024).]