Looking for the plastic bracket that holds the computer.

[url=https://www.ebay.com/itm/235043255476?_skw=ecu&itmmeta=01J9SPYXF9J4555797DXPQ6EHB&hash=item36b9ab74b4:g ogAAOSwxKBkgpJk][/url]

Sorry couldn't help myself $100.

I can get one for you but I'm in Canada you may have better options closer to you if not let me know.

[This message has been edited by Matthew_Fiero (edited 10-09-2024).]

Or this for $25
https://www.ebay.com/itm/132207664523?

------------------
Original Owner of a Silver '88 GT
Under 'Production Refurbishment' @ 136k Miles

Plastic mounting brackets?

I just modified my ECM housing to hold a new ECM, but I do have the old ECM board and will look at it.

V-6 or Duke?

They are different.

messaged you

I had trouble finding an ECM tray to fit the 4.9L Cadillac ECM thats in my Fiero. Joe told me that the Duke 4 cyl tray fits but I could not locate one. I purchased the steel GM early LS steel brackets on eBay and used them. The holding points were nearly the same. Can't say that they will fit your application but the are available and cheap.



I just flattened the lower tabs so that I could screw the ECM bracket in place.
------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.


"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

[This message has been edited by Dennis LaGrua (edited 10-18-2024).]